How to Make an Air Pruning Bed 2: Step-By-Step Instructions




Refer to  How to Make an Air Pruning Bed 1: Plans, Shopping List, and Budget for planning and further instructions.




Process:

1. Cut the 10' douglas fir/cedar/pine boards, using a circular saw, into:

4' (qty: 2)

2' (qty: 2)



2.Cut the lath, using a circular or miter saw, into:

4' (qty: 2)

2' (qty: 2)



3. Cut the hardware cloth in half using tin snips.



3. Construct main box frame by attaching the 4' sides to the 2' ends. Secure with four of the 3 1/2" screws at each juncture. Pre-drilling the holes helps to prevent the wood from splitting.




4. Place hardware cloth on bottom and wrap around sides. Staple into place. Fold the edges like you're wrapping a present.



5. Reinforce the stapled hardware cloth with pieces of lath. Secure with the 1 1/2" screws. I used 5 screws on the long edges and 3 on the short edges. Again, pre-drilling the holes helps to prevent the wood from splitting.





6. Set the box on pedestals. You could use landscaping bricks, milk cartons, cinder blocks, logs, etc.




7. Fill with high-quality dirt and/or compost, then water the dirt to help it settle in. You're ready to plant!






7. 



Comments

Popular posts from this blog

How to Make an Air Pruning Bed 1: Plans, Shopping List, and Budget

DIY Wooden Garden Signs

Dandelion Poppers